sling changes and more

As much as I am enjoying being quite a bit lighter...and getting lighter still...one of the side effects of either the weight loss, medications or both is that I feel weaker. To that end, I decided to revisit the idea of the anchor point to get more rearward pressure while shooting the carbine. I obtained a QD Tango Down vertical grip, which is a great part but more length than I needed or really wanted. I also have a Larue Tactical hand stop, another cool part but proving to be a little small for the giant size of my bear paw hands.

Another thing I noticed is that my rifle, as it was configured, is heavy, even with a Micro on it. I swapped out a Comp M2 for an R1 Micro (really wanted the H1 since I don't have NODs to require a T1, but the price I got on the R1 couldn't be beaten) and already had an M600 on it, but the rifle's still a little over 11 pounds. Here's what she looked like before:

That version worked perfectly fine, and yes of course I still have the Surefire High Capacity Magazine. It was, however, a heavy rifle, so I swapped out the optic for the aforementioned R1. I could save a little more weight by using a lighter mount for it than the Larue LT660, but I'm just too much a fan of the throw lever mount. That lightened the rifle, but not enough:

Yup, that's the lanyard on my camera messing up a moderately decent photo.

As I mentioned at the beginning of this here post, I decided to add a leverage point to be able to pull the rifle into my shoulder with more pressure. First I tried a hand stop, then a vert grip, and tested them both against the slick rail on the timer. Times were about equal between the slick rail and the vert grip, which wasn't as surprising to me as the hand stop being slower than the vert grip. The timer don't lie, so I try to test most if not all changes against it. The only way to be able to definitively say one thing "works for me" better than something else, and not basing it on liking one thing better than another, is to have a way to quantify it, which means empirical data. The timer is the simplest way to do that.

If you don't have a timer, I can't recommend getting one strenuously enough. They're not terribly expensive, and they will definitively tell you what's going on with your shooting. Think you're fast out of the holster, in transition, or with your shot to shot splits? The timer will tell you if what you think is going on is really happening. Ya gotta get one! Surefire's app was still free a few months ago when I downloaded it to my phone. There's really no excuse not to have a timer.

So, back to the topic at hand. I went over to Matt E.'s place last night to hang out, because a transformer blew and turned off the power to my whole neighborhood. Better to hang out on the couch with power than without. Naturally, I brought the carbine along, since that's just what we do. He had a stubby Tango Down vert grip that he wasn't using, so we threw that on the riffle. Matt, as you know by now, absolutely rocks. Since it uses the double lock bar attachment instead of the throw lever, it's a light part in comparison. Today, I removed my Magpul ACS and re-installed my CTR to save more weight. Well, that certainly helped, but there's still the issue that I went to the ACS in the first place for: the CTR is a short stock in comparison, even with the "enhanced" butt pad. Magpul, do me a favor and create a full sized CTR for us normal length armed guys, will ya?

I've trimmed a good bit of weight off my rifle, down to about 8 1/2 pounds now. That's more manageable. And not that I care too much about colors, but it's a blacker black rifle than it used to be. I know the checkerboard rail covers are going to offend some people, so that's a good reason to have 'em that way. Actually, it was just a matter of I did it because I could. Looks fine to me.

 Also note the very cool IO Cover for the Micro. LF'er Joe Chen is developing. Check out Kickstarter to get on board with the funding to get these onto the market. Once they're available to dealers, my plan is for ATS to be among the first, if not the first, to carry these. Simple part to install, and works really well. The caps nest within each other, and it can all be done one handed.  The material the cover is made of was chosen for stability through a wide temperature range and is impervious to common gun solvents. If you have a Micro, you're gonna have to have one of these. Here it is closed:

And here you can see the covers nested together. One interesting thing about the nesting is that if you want it lower, as shown here, move the tabs apart. Want 'em more in the middle, move those tabs closer together.

I'm sure there's something else I should put in this post, but I'll realize that later. As of right now, get yourself to the range!